Clear Modem G Series User Guide User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
21
Manage Your Modem (continued)
CLEAR Modem Home Page / Advanced / Local Address / DHCP Server Tab
Warning: This tab includes settings that could negatively impact the performance of the Modem, if
set incorrectly. These settings should be modified only by advanced users or if directed by CLEAR
Customer Care.
Dynamic Host Configuration Protocol (DHCP) is used to automatically assign IP Addresses and
configuration information to wi-fi clients, thereby greatly simplifying network set up. If you desire, you
may configure the range of IP Addresses that the CLEAR Spot will allow to recognize the CLEAR
Spot wi-fi network name.
Enable DHCP Server: If enabled, the DHCP server on the gateway assigns IP addresses to the
computers and other hosts on your network, if they have DHCP enabled. By default, the gateway
server is enabled. If there is another DHCP server running on your network (on another router),
disable one of the DHCP servers.
DHCP Server IP Address: Enter the default “Port Forwarding” LAN Client IP Address.
DHCP Starting IP Address: Sets the first IP address assigned by the DHCP server, in dotted
decimal format. It must be greater than the IP address value of the gateway.
DHCP Ending IP Address: Sets the final IP address assigned by the DHCP server. If the
DHCP server runs out of DHCP addresses, users cannot access network resources. If this
happens, increase the Ending IP or decrease the Lease Time.
DHCP Lease Time: Sets the time that a network computer remains connected to the gateway
using its currently assigned IP address. At the end of this time, the DHCP server renews the
lease or assigns the computer a new IP address.
Click “APPLY” when you’re ready to change the DHCP Server setting.
If you don’t want to make any changes to the DHCP Server settings, click “CANCEL”.
The other tabs (Home, Device Status, and Basic) appear on all screens of the CLEAR Modem Home
Page.
At the bottom of every tab of the Modem Home Page, you can click:
Logout: To log out of the Modem.
Reboot: To turn the Modem off and turn it back on.
Reconnect: To reconnect to the Modem, if you’ve lost your connection.
If you’re using your Modem
and are connected to the
internet, click here to open
the Modem Home Page.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments